18 mm 360° Silicone LED Diffuser (D18)
18 mm 360° Silicone LED Diffuser (D18)
The D18 is a flexible, circular silicone LED diffuser with an 18 mm outer diameter and 8.6 mm inner width, designed for compatible LED ribbon up to 8 mm wide. It diffuses light around the tube for architectural outlines, decorative curves and custom illuminated features.
CAD $45.99 per metre. Choose 1 m ($45.99), 2 m ($91.98) or 5 m ($229.95). Optional mounting clip kits add CAD $15.00 per selected length. End caps are included in your selected configuration.
For 360° light coverage, install two suitable LED strips back-to-back. Check their combined height before installation. The supplier states that two 5050 LED strips will not fit inside this tube.
Diffuser only: LED ribbon, power supply and controller are sold separately. Supplier model: FLNLT-D18-360.
Explore Resolution Lighting extrusions and diffusers
Specifications
- Supplier model: FLNLT-D18-360.
- Outer diameter: 18 mm / 0.71 in.
- Inner width: 8.6 mm / 0.34 in.
- Compatible LED ribbon: up to 8 mm wide; verify combined strip height.
- Beam angle: 360° with a suitable LED configuration.
- Material: soft, flexible silicone, described by the supplier as food-grade.
- Flexible, bendable and cuttable to the required length.
- Profile waterproof rating: IP67, supplier stated.
- UV resistant: yes, supplier stated.
- Silicone profile temperature range: −50°C to 200°C, supplier stated. This is not a temperature rating for a completed LED lighting system.
- Lengths: 1 m / 3.28 ft, 2 m / 6.56 ft and 5 m / 16.4 ft.
Lengths, accessories and pricing
Base tube price: CAD $45.99 per metre. 1 m = $45.99; 2 m = $91.98; 5 m = $229.95. The optional mounting clip kit adds CAD $15.00 per selected length, for totals of $60.99, $106.98 or $244.95.
End caps are included. Choose with holes, without holes, or half of each. Select one continuous length or separate rolls. End cap type and roll arrangement do not change the price.
Installation and compatibility
Two suitable 8 mm LED strips are mounted back-to-back for 360° light coverage. Check the combined strip height before installation. Two 5050 LED strips do not fit inside this tube, according to the supplier. Resolution Lighting RL96 (10 mm) and RL112 (12 mm) ribbon do not fit this 8 mm profile.
LED ribbon, power supply and controller are not included. Keep the completed system within the temperature limits of its LED ribbon and other components. Seal end caps and cable entries correctly; the installed water resistance depends on all components and workmanship. Final output depends on the LED ribbon, density and installation.