20 × 20 mm Black Silicone LED Diffuser — Resolution Lighting

20 × 20 mm Black Silicone LED Diffuser

Black top / 1 m / Kit: Tube only · End caps: With holes · Roll arrangement: One continuous length
$44.99 CAD
Skip to product information
20 × 20 mm Black Silicone LED Diffuser — Resolution Lighting
  • 20 × 20 mm Black Silicone LED Diffuser — Resolution Lighting
  • 20 × 20 mm Black Silicone LED Diffuser — Resolution Lighting
  • 20 × 20 mm Black Silicone LED Diffuser — Resolution Lighting
  • 20 × 20 mm Black Silicone LED Diffuser — Resolution Lighting
  • 20 × 20 mm Black Silicone LED Diffuser — Resolution Lighting
  • 20 × 20 mm Black Silicone LED Diffuser — Resolution Lighting
  • 20 × 20 mm Black Silicone LED Diffuser — Resolution Lighting
  • 20 × 20 mm Black Silicone LED Diffuser — Resolution Lighting
  • 20 × 20 mm Black Silicone LED Diffuser — Resolution Lighting
  • 20 × 20 mm Black Silicone LED Diffuser — Resolution Lighting
20 × 20 mm Black Silicone LED Diffuser

20 × 20 mm Black Silicone LED Diffuser

$44.99 CAD

A flexible 20 × 20 mm silicone diffuser with a black body and a choice of Black top or White top. Both finishes are offered on this one product page at the same CAD $44.99-per-metre base price.

The top-emitting profile provides a 120° light distribution and a 13.5 mm inner channel for compatible LED ribbon up to 12 mm wide. Use it for architectural outlines, illuminated curves, signs and custom linear lighting.

Lengths and prices: 1 m = CAD $44.99; 2 m = $89.98; 5 m = $224.95. Optional mounting clip kits add CAD $10.00 per selected length. End caps are included in your selected configuration.

Diffuser only: LED ribbon, power supply and controller are sold separately. The illuminated application photo shows separately installed LED ribbon. Supplier model: FLNLT-CT2020.

View both finishes on the Resolution Lighting website

Specifications
  • Supplier model: FLNLT-CT2020.
  • Outside dimensions: 20 mm wide × 20 mm high.
  • Inside channel width: 13.5 mm.
  • Maximum LED strip width: 12 mm; verify component height and fit.
  • Lighting direction: top emitting.
  • Beam angle: 120°.
  • Body: black silicone, with Black top or White top.
  • Material: flexible silicone, described by the supplier as food-grade.
  • Profile waterproof rating: IP67, supplier stated.
  • UV resistant: yes, supplier stated.
  • Silicone profile temperature range: −50°C to 200°C, supplier stated. The completed lighting system must stay within the ratings of its LEDs and other components.
  • Lengths: 1 m / 3.28 ft, 2 m / 6.56 ft, 5 m / 16.4 ft.
Finishes, lengths and pricing

Both top finishes cost CAD $44.99 per metre. Black top means a full-black exterior; White top means a black body with a white light-emitting surface.

Tube only: 1 m $44.99; 2 m $89.98; 5 m $224.95. Optional mounting clip kits add $10.00 per selected length: $54.99, $99.98 or $234.95 total. End cap type and roll arrangement do not change the price.

End caps are included: choose with holes, without holes, or half of each. Choose one continuous length or separate rolls. The supplier specifies 2 clips for 1 m, 4 for 2 m and 10 for 5 m when a clip kit is selected.

Installation and compatibility

For compatible single-colour, COB, CCT, RGB, RGBW, RGBCCT or addressable LED ribbon up to 12 mm wide. Check ribbon component height and thermal requirements before assembly. The profile bends along the back of the LED strip and can be cut to the required length.

Mount using the optional clips, a suitable aluminum channel for straight runs, or a compatible flexible mounting profile for curved paths. LED ribbon, power supply, controller and mounting channels are sold separately.

Seal end caps and cable entries correctly; the installed water resistance depends on all components and workmanship. Final brightness and colour depend on the LED ribbon, top finish and installation.

You may also like